FAQs

The minimum temperature required for exterior painting varies by product, typically ranging from 35 to 50 degrees Fahrenheit. This temperature must be maintained throughout the entire drying process. Our professional painters will assess the conditions to ensure proper drying before commencing the painting project.

Both brushing and rolling and spraying are effective paint application methods when executed correctly. Professional painting companies often utilize both techniques. Spraying is particularly advantageous for large areas, new construction, and surfaces with deep crevices. However, it's important to note that back brushing or rolling is necessary to properly work the paint into the substrate.

When painting a room, it's advisable to start with the ceiling. After the ceiling is complete, proceed to paint the walls. The final step in the painting process should be the trim. Interestingly, a study by House Grail found that up to 88% of people express a desire to spend more time at home after painting an interior room. For further guidance on interior painting, we encourage you to consult with our experienced painting professionals.

To paint cabinets with existing stain and polyurethane, begin by thoroughly cleaning and degreasing the surfaces. Next, apply a bonding primer to ensure proper adhesion. Follow this with two coats of enamel finish paint. For expert assistance with cabinet painting, we invite you to contact Levine Painting Company, Inc.

Newly plastered walls require a minimum drying period of 7 days. Once dry, our painting professionals will apply a coat of masonry primer, followed by two coats of finish paint to achieve the desired result.

Wallpaper removal techniques vary depending on the type of wallpaper. In some cases, it can be peeled off directly. More commonly, a wallpaper stripper solution is required. Our process involves using a scoring tool to allow the solution to penetrate the wallpaper and soften the adhesive. We then apply the solution, wait for 15-20 minutes, reapply, and proceed to remove the paper using a wallpaper shaver.

To determine the amount of paint needed, calculate the square footage of the area to be painted and divide it by the coverage rate specified by the paint manufacturer. Most residential paints cover approximately 400 square feet per gallon. For precise calculations and professional advice, we recommend contacting Levine Painting Company, Inc., a trusted name in the painting industry.

When painting over rusty metal, start by removing all rust using a wire brush and sanding. Apply an oil-based rust-inhibitive primer to the bare metal surface. Follow this with two coats of a rust-inhibitive enamel finish coat. For detailed guidance on this process, we encourage you to consult with our knowledgeable painting professionals.

Exterior vinyl siding can indeed be painted. The process begins with a thorough cleaning of the siding. Most exterior paints will adhere to vinyl without issues. However, it's crucial to select a color that is designated as vinyl-safe. This precaution is necessary because certain colors may absorb excessive heat from the sun, potentially causing the vinyl to warp or buckle. Our experienced painters can assist you in selecting an appropriate color for your vinyl siding.

To repaint trim, begin by cleaning the surface thoroughly. Next, either de-gloss or lightly sand the existing paint to reduce its sheen, which will improve adhesion of the new paint. Apply two coats of enamel finish paint for optimal results. For professional assistance with trim repainting, we invite you to contact the experienced painters at Levine Painting Company, Inc.